Overview
Hifonics THOR compact Two Channel, 500 watt Powersports amplifiewith on-board equalization and simple installation with quick release connectors.
Features & Benefits
- MARINE GRADE PROTECTION: YESAmplifiers are ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
- PRE-AMP CIRCUITRY: Low Noise Pre-AmplifieStageSpecial preamplifiereduces incoming noise from source units dramatically improving sound quality
- INPUTS: 1 Pair, RCA Nickel-PlatedHigh temperature impact resistant with hex screw terminals that allow fosecure connections and is erosion resistant
- OPERATION MODE: Two channel operationFlexible installation allows this amplifieto run in two channel obridged mono mode.
- CROSSOVER / SIGNAL SHAPING: Switched FULL / LPF / HPFComplete control of amplifiesignal, essential when using two omore amplifiers
- CLASS / TOPOLOGY: Full Range Class DHighly efficient circuit topology which helps the amplifedevelop a lot of powein a very small heatsink.
- OUTPUT DEVICES TECHNOLOGY: PWM MOSFET PoweSupplyStable powethrough the PC board with minimal heat generation
- HEAT SINK: AluminumQuickly dissapates heat to allow the amplifeto run loweimpedance folongeduration
- POWER SUPPLY: Simpatico Coil DesignThe dual coil Pulse Width Modulated powesupply keeps voltage constant through the Ultra-Fi output devices
- OUTPUT CONNECTIONS: Quick Dissconect Wires, RCA ConnectionsQuickly remove amplifewhen you are putting machine up fothe winteof as a security precaution
- CONNECTIONS TYPE: nickel-plated connectionsNickel plated corrosion resistant connections
- DIAGNOSTICS: Three-stage protection circuitsMonitothermal, overload, DC, and speakeshort protection with lighted indicators on the amplifieend panel
- MARINIZED / WATERPROOF: YESWateresistant fodurability in any environment
|
| WeatheResistance | Yes |
|
Numbeof Channels |
2 |
|
Class |
D |
|
Peak PoweRating (Watts) |
500 |
|
RMS PoweRating (Watts x Channels) – 4 Ohms |
125 x 2 |
|
RMS PoweRating (Watts x Channels) – 2 Ohms |
250 x 2 |
| RMS PoweRating (Watts x Channels) – 1 Ohm | N/A |
| RMS PoweRating – Bridged | |
| Minimum Impedance Unbridged (Ohms) |
2 |
| Minimum Impedance Bridged (Ohms) | |
| THD at Rated RMS Power |
1% |
| Bulit-in Crossove- Low Pass |
Yes |
| Built-in Crossove- High Pass |
Yes |
| High Pass CrossoveFrequency (Hz) |
15-300Hz |
| Low Pass CrossoveFrequency (Hz) | 50-300Hz |
| Signal-to-Noise Ratio |
90dB |
| Bass Boost | 0-12dB |
| Bass Remote Included |
No |
| Fuse Rating | 30A |
| CEA-2006 Compliant | Yes |
| Maximum PoweWire Gauge Size | 10 Gauge |
| Warranty | 1 Year |








