Product Description
The FREUD DSP2150 is a Speed Demon spade bit designed for fast, clean wood boring in both cordless and corded drill drivers. Sold in a 5-pack, each bit measures 1-1/4 inches in diameter and 6 inches in length. The speed-tip point is self-feeding, which reduces downforce required and increases drilling speed compared to standard flat spade bits. The curved paddle geometry accelerates chip evacuation, keeping the flutes clear and extending run time per battery charge. The shank is impact-rated for use in impact drivers as well as conventional drill drivers, making this bit suitable for high-torque cordless tools common on framing and rough-in work.
This bit is well suited for residential and light commercial rough-in applications where tradespeople need to bore through dimensional lumber, studs, and plates quickly. Electricians, plumbers, and HVAC installers drilling wire and pipe penetrations through wood framing will find the self-feeding tip useful for production drilling. The 6-inch length provides adequate reach for single-stud penetrations without an extension. The 5-pack quantity supports repetitive job-site use where bit wear is expected.
Key Features
- Self-feeding speed-tip design reduces drilling effort and increases hole-making speed over traditional spade bits
- Optimized curved paddle promotes aggressive chip evacuation for more holes per battery charge
- Impact-rated shank compatible with cordless impact drivers and standard drill drivers
- 1-1/4 inch diameter suits common conduit, pipe, and cable rough-in penetration sizes
- 6-inch length reaches through standard dimensional lumber and single wall plates
- Sold as a 5-pack for extended job-site supply
Compatibility
Designed for use in cordless and corded impact drivers and drill drivers; suitable for boring through dimensional lumber, wood studs, and similar wood substrates in rough-in trade applications.
Installation Notes
Installation of this bit requires a drill driver or impact driver with a standard hex chuck or quick-release chuck that accepts the spade bit shank. Ensure the tool is powered off and the battery is removed or the cord is disconnected before changing bits. When drilling near structural members, follow applicable building codes regarding allowable notch and hole placement in load-bearing framing. Secure the workpiece before drilling to prevent binding or kickback.
Technical Specifications
- Bit Diameter: 1-1/4 inches
- Bit Length: 6 inches
- Package Quantity: 5 per pack
- Unit of Measure: EA
- Weight: 0.7 pounds
Standard Information
- Brand: FREUD
- Manufacturer Part Number: DSP2150
