California Energy Commission (CEC) CEC Title 20 Section 1605.3(g)(5) requires any motor used for residential filter pump applications and manufactured before July 19, 2021 that is greater than or equal to 1.0 THP be replaced with a two-speed or variable speed motor. Effective July 19, 2021 CEC Title 20 1605.3(g)(6) requires any motor used for replacement dedicated-purpose pool pump motor on all residential and commercial applications and manufactured on or after July 19, 2021 that is greater than or equal to 0.5 THP be replaced with a variable speed motor.
This motor can not be sold in California.
Century Replacement Motors – E-Plus, C Frame, Threaded Shaft, Single Phase 1.5 HP, 208-230/115 Volt – B796
Total HP = 1.95
Features
- Sealed Ball Bearings
- 304 Bearing Shaft End
- Energy Efficient
- 303 Stainless Steel Shaft
- Threaded Shaft
- Switchless
- Permanent Split Capacitor
- Open Dripproof
- UL 1081 Design
General Specifications
| Model : | B796 | Catalog No : | B796 |
| Part Description : | MODEL-CFHP-56FR | Category : | Induction Motors |
| Stock : | Yes |
Nameplate Specifications
| Output HP : | 1.5 Hp | Output KW : | 1.1 kW |
| Frequency : | 60 Hz | Voltage : | 208-230/115 V |
| Current : | SF 8.7-7.8/15.6 A | Speed : | 3450 rpm |
| Service Factor : | 1.3 | Phase : | 1 |
| Duty : | Continuous | Insulation Class : | B |
| Frame : | P56J | Enclosure : | Drip Proof |
| Overload Protector : | Thermally Protected | Ambient Temperature : | 50 °C |
| UL : | Recognized | CSA : | Y |
Technical Specifications
| Electrical Type : | Permanent Split Capacitor, Single Or Dual Voltage | Poles : | 2 |
| Rotation : | Counterclockwise Pump End | Mounting : | Round |
| Motor Orientation : | Horizontal | Drive End Bearing : | BALL |
| Opp Drive End Bearing : | BALL | Frame Material : | Rolled Steel |
| Shaft Type : | Threaded | Overall Length : | 13.55 in |
| Frame Length : | 8.00 in | Shaft Diameter : | 0.625 in |
| Shaft Extension : | 2.57 in | UPC : | 786674013071 |
| Weight : | 36.00 LB |
